AEMC OX7102-CII, Руководство пользователя

Страница: 41 / 208

Oscilloscope Mode - Display
SCOPIX Oscilloscopes IV - 41
Oscilloscope Mode (cont'd)
1. Status area
Bargraph
Permanent settings
Cursor
measurements
Three types of general information appear in this area:
•
The bargraph representing the screen position, the trigger and the
cursors in the acquisition memory.
•
The instrument permanent settings .
•
The measurements , when the cursors are present on the screen.
Each element in the bargraph can be moved with the stylus.
This zone refers to the trigger status (mode, edge, source, current status).
Example : AUTO 1 STOP
When the stylus is placed on this information, the "Trigger Parameters"
menu can be opened by pressing twice.
This zone refers either to:
•
The horizontal (dt) and vertical (dv) differences between 2 cursors in the
case of manual measurements.
Example :
(1) dt = 110.0 µs, div = 100.0 µV
•
Phase measurement in the case of manual phase measurement (Ph).
Example : (1) Ph = 200.0°
•
The automatic measurements selected using the "Automatic
Measurements" or "Phase measurement" menus.
Example: (2) F = 1.0000 kHz, Vpp = 7,500 V
(1)dt=110,0µs, div=100.0µV
Trig 1 Pretrig
Position and movement of
time trigger
Position and movement of
manual cursors
Movement towards left of
screen in acquisition
memory
Movement towards right of
screen in acquisition
memory
Permanent settings
Cursor measurements
Representation and
movement of the screen in
acquisition memory
T 1 2