AEMC OX7102-CII, Руководство пользователя

Страница: 97 / 208

Multimeter Mode - Display
Multimeter Mode (cont'd)
2. Channel (
x)
multimeter)
There is a display area reserved for each of the instrument's channels. In each
of these, the following information is indicated:
Channel
CH1, CH2, CH3 or CH4
Coupling
The input coupling selected (see §. Vert. Menu) is indicated in this field. For
the Ohmmeter, Capacimeter, Continuity, Component Test, Wattmeter, the
coupling is not shown.
Autorange Indicates whether range changing is automatic.
Symbols A symbol is displayed corresponding to the type of selected measurement :
Ohmmeter,
╫ Capacimeter,
;Ò
Continuity
Component test
PT100 Temperature measurement
Principal
measurement
If the channel is activated, the measurement result is displayed. Otherwise, the
message ‘– X –‘ fills the unused space.
Unit
Contains the measurement unit associated with the current measurement
range.
Secondary
measurement
S elected through the “
Display
” menu.
*
If no display is selected or if the display is not possible (e.g. frequency
measurement for a continuous signal, etc.), the character string
‘-----‘ is displayed.
If the channel is not selected, ‘– X –‘ is displayed.
3. Cursor value
Display of the absolute position of the cursor on the measurement reference
channel.
Time position: hour, minute, second
Level position: depending on the type of measurement.
If your instrument is equipped with the "EXTENDED ACQUISITION MEMORY"
option, an indication of the zoom status is also displayed (Zoom ON / Zoom
OFF) in this zone.
Secondary measurement
Unit
Principal measurement
Symbol Channel
Symbol
Auto-
ranging
Secondary measurement
Unit
Principal measurement
Coupling Ch.
Hour; minute; second
Level
Cursor (Ref)
SCOPIX Oscilloscopes V - 97