AEMC OX7102-CII, Руководство пользователя

Страница: 164 / 208

Applications
Applications (cont’d)
9. Automatic
measurement in
Harmonic Analysis
mode
Initially, there must be one or two traces on channels CH1 to CH4.
Recall
-
Only the channels (and not the functions) can be the subject of
harmonic analysis.
- In this mode, the time base is not adjustable.
•
Using the key opposite , select the "Harmonic Analysis" mode.
e traces of hown in a dark co
•
Set the traces for channels CH1 to CH4 to the mode "Oscilloscope".
lour, while the
es of CH2 olour of the trace).
onic b
-
the fundamental (F) and the first 15 harmonics
the even harmonics (2 to 30)
-
the odd harmonics (3 to 31)
The selection chosen appears under the breakdown display.
•
The "SIGNAL" table under the breakdown provides information on:
-
the active channel(s) (CH1 to CH4)
- the RMS voltage of the signal in V
-
harmonic distortion rate (in %) of the signal
•
The " " symbol, present on the fundamental (F) or one of the
harmonics and modifiable using the stylus, means that measurements
can be made on the harmonic selected.
Th channels CH1 and CH4 are s
trac and CH3 are light (or in the c
•
Use the "Display" menu (see §. Display) to select the
harm reakdown required:
-
IX - 164 SCOPIX Oscilloscopes