AEMC OX7102-CII, Руководство пользователя

Страница: 63 / 208

Oscilloscope Mode - The "Trigger" Menu
SCOPIX Oscilloscopes IV - 63
Oscilloscope Mode (cont'd)
Pulse
Selection of pulse-width trigger. In all cases, the effective trigger occurs on the
pulse trailing edge.
< triggers on a pulse if its duration is less than the value set
= triggers on a pulse if its duration is equal to the value set
> triggers on a pulse if its duration is greater than the value set
25.0 µs Adjustment with the stylus using the time setting scroll bar
Double-tapping in this field displays a virtual numeric keypad which can be used
to directly input the value.
The choice of the or edge in the "Main" tab defines the limits of the
analysis:
•
edge defines a pulse between and
•
edge defines a pulse between and
Example
Signal injected on CH1: 1 pulse of 50 µs (repetitive or not)
The trigger parameters in the main menu are active (Source, Level, Edge, etc.).
The oscilloscope is triggered when the signal's pulse width is equal to the
specified pulse width (25.0 µs + tolerance).
The trigger occurs on the ascending edge of the pulse, but is effective on the
trailing edge.