AEMC OX7102-CII, Руководство пользователя

Страница: 184 / 208

Technical Specifications
X - 184 SCOPIX Oscilloscopes
Technical Specifications
« Oscilloscope » Function
Only the values assigned with a tolerance or limits are guaranteed
values (after half an hour warming up). Values without a tolerance
are for information only.
Vertical deviation
Characteristics OX 7102 - OX 7104
Number of channels 4 channels: CH1 to CH4
(
OX 7104
)
2 channels: CH1 & CH4
(
OX 7102
)
Vertical ranges 2.5 mV to 200 V/div.
Variation in steps (no continuous variable coefficient)
BW at - 3dB on all vertical ranges
from 2.5 mV to 200 V/div.
100 MHz
Measured on 50
Ω
load with a 6 div. amplitude signal
Max. input voltage
600 VDC, 600 Vrms, 850 Vpk (DC + peak AC at 1 kHz) without 1/10 probe
1400 V
DC
, 1 kVrms with Probix HX0030 probe
derating -20 dB/decade from 100 kHz to 100 MHz
Input Type Probix safety connector: class 2, insulated inputs
Vertical offset dynamic ± 10 divisions on all ranges
Input coupling AC: 10 Hz to 100 MHz
DC: 0 to 100 MHz
GND: reference
Bandwidth limit 15 MHz, 1.5 MHz, 5 kHz
Rise time on all vertical ranges
2.5 mV to 200 V/div.
< 3,5 ns
Cross-talk between channels > 70 dB
Same sensitivity on both channels
Response to rectangular
signals: 1 kHz and 1 MHz
Positive or negative overshoot
Overshoot
≤
3 %
Aberrations
≤
3 %
Peak-to-peak gain accuracy ± 1 % (with averaging of 4) at 1 kHz
Vertical resolution of the display ± 0.4 % of full scale (without ZOOM)
0.025 % in ZOOM mode (12 bits)
DC vertical measurement accuracy ± [1 % x (reading - offset)
+ accuracy of vertical offset
+ (0.05 div.) x (V/div.)]
Resolution of the measurements 12 bits
Accuracy of vertical offset ± [1 % x (offset value)
+ 200 µV + (0.1 div.) x (V/div.)]
Probes The probe's attenuation coefficient in the display is taken into account
automatically when Probix
probes are used
.
Vertical ZOOM function on acquired
or saved curve
ZOOM factors: 16 max.
Electrical safety (not for accessory) 600V CAT III, 1000V CAT II, double insulation
Max. voltages (not for accessory) floating: 600V CAT III, 1000V CAT II, from 50 to 400 Hz
between channels: 600V CAT III, 1000V CAT II, from 50 to 400 Hz
Input impedance
1 M
Ω
± 0.5 % approx. 17 pF
Display modes ch1, ch4
(
OX 7102
) •
ch1, ch2, ch3, ch4
(
OX 7104
)