Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 167 / 326

EKI-9500 Series User Manual 148
The following table describes the items in the previous figure.
4.3.16.7 Transfer
Use the File Transfer page to upload files from the device to a remote system and to
download files from a remote system to the device.
To access this page, click System > Utilities > Transfer .
Figure 4.153 System > Utilities > Transfer
The following table describes the items in the previous figure.
Item Description
Status
IP Address Conflict
Currently Exists Indicates whether a conflicting IP address has been detected since
this status was last reset.

False: No conflict detected (the subsequent fields on this page
display as N/A).

True: Conflict was detected (the subsequent fields on this page
show the relevant information).
History
Last Conflicting IP
Address The device interface IP address that is in conflict. If multiple conflicts
were detected, only the most recent occurrence is displayed.
Last Conflicting MAC
Address The MAC address of the remote host associated with the IP address
that is in conflict. If multiple conflicts are detected, only the most
recent occurrence is displayed.
Time Since Conflict
Detected The elapsed time (displayed in days, hours, minutes, and seconds)
since the last address conflict was detected, provided the
Clear His-
tory button has not yet been pressed.
Refresh Click Refresh to update the screen.
Run Detection Click Run Detection to activate the IP address conflict detection
operation in the system.
Clear History Click Clear History to reset the IP address conflict detection status
information that was last seen by the device.
Item Description
Transfer Protocol The protocol to use to transfer the file. Files can be transferred from
the device to a remote system using TFTP, or FTP. Files can be trans-
ferred from a remote system to the device using HTTP, TFTP, or FTP.
Upload To transfer a file from the device to a remote system using TFTP, or
FTP, click the upload icon in the same row as the desired transfer pro-
tocol. The File Upload window appears. Configure the information for
the file transfer (described below), and click the upload icon to the
right of the Progress field to begin the transfer.
Download To transfer a file from a remote system to the device using HTTP,
TFTP, or FTP, click the download icon in the same row as the desired
transfer protocol. The File Download window appears. Configure the
information for the file transfer (described below), and click the down-
load icon to the right of the Progress field to begin the transfer.