Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 79 / 326

EKI-9500 Series User Manual 60
The following table describes the items in the previous figure.
To add a new SNMP community:
Click System > Advanced Configuration > SNMP > Community > Add Commu-
nity .
Figure 4.49 System > Advanced Configuration > SNMP > Community > Add
Community
The following table describes the items in the previous figure.
Item Description
Community Name Community name used in SNMPv1/v2 packets. This is configured in
the client and identifies the access the user may connect with.
Security Name Identifies the security entry that associates communities and Groups
for a specific access type.
Group Name Identifies the group associated with this community entry.
IP Address Specifies the IP address that can connect with this community.
Refresh Click Refresh to update the screen.
Add Community Click Add Community to add a new SNMP community.
Add Community
Group Click Add Community Group to add a new SNMP community group.
Remove Click Remove to remove the selected entries.
Item Description
Community Name Community name used in SNMPv1/v2 packets. This is configured in
the client and identifies the access the user may connect with.
Community Access Specifies the access control policy for the community.
Community View Specifies the community view for the community. If the value is empty,
then no access is granted.
IP Address Specifies the IP address that can connect with this community.
Submit Click Submit to save the values.
Cancel Click Cancel to close the window.