Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 174 / 326

155 EKI-9500 Series User Manual
Static Bindings
Use the DHCP Snooping Static Bindings page to view, add, and remove static bind-
ings in the DHCP snooping bindings database.
To access this page, click Switching > DHCP Snooping > Base > Static Bindings .
Figure 4.159 Switching > DHCP Snooping > Base > Static Bindings
The following table describes the items in the previous figure.
To add a static entry to the DHCP snooping bindings table:
Click Switching > DHCP Snooping > Base > Static Bindings > Add .
Figure 4.160 Switching > DHCP Snooping > Base > Static Bindings > Add
Rate Limit (pps) The rate limit value for DHCP packets received on the interface. To
prevent DHCP packets from being used as a DoS attack when DHCP
snooping is enabled, the snooping application enforces a rate limit for
DHCP packets received on untrusted interfaces. If the incoming rate
of DHCP packets exceeds the value of this object during the amount
of time specified for the burst interval, the port will be shutdown. You
must administratively enable the port to allow it to resume traffic for-
warding.
Burst Interval (Sec-
onds) The burst interval value for rate limiting on this interface. If the rate
limit is unspecified, then burst interval has no meaning.
Refresh Click Refresh to update the screen.
Edit Click Edit to edit the selected entries.
Item Description
Interface The interface on which the DHCP client is authorized.
MAC Address The MAC address associated with the DHCP client. This is the Key to
the binding database.
VLAN ID The ID of the VLAN the client is authorized to use.
IP Address The IP address of the client.
Refresh Click Refresh to update the screen.
Add Click Add to add a static entry to the DHCP snooping bindings table.
Remove Click Remove to remove the selected entries.
Item Description