Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 135 / 326

EKI-9500 Series User Manual 116
4.3.10.2 PoE Port Configuration and Status
Use the PoE Port Configuration and Status page to configure PoE settings on inter-
faces.
To access this page, click System > PoE > PoE Port Configuration and Status .
Figure 4.119 System > PoE > PoE Port Configuration and Status
The following table describes the items in the previous figure.
Power Supply Volt-
age (dV) The measured usage voltage of PSE in dV.
Temperature Guard
Threshold (°C) Configure PoE temperature guard threshold.
System Tempera-
ture (°C) The measured temperature of PSE in degree Celsius.
System Fault Indica-
tion The fault status of the PSE.
Submit Click Submit to save the values and update the screen.
Refresh Click Refresh to update the screen.
Cancel Click Cancel to restore default value.
Item Description
Item Description
Interface The interface associated with the rest of the data in the row. When
configuring PoE settings, this field identifies the interface(s) being con-
figured.
Admin Mode Indicates whether PoE is administratively enabled or disabled on the
interface.
Priority The priority of the port when allocating available power. Power is deliv-
ered to the higher priority ports when needed before providing it to the
lower priority ports. Possible values are Critical, High, and Low. For the
same priority, the low number interface port will allocate available
power first.
Power Pairs Configure PoE port power pairs.
Power Class The device class determines the power limit. The switch learns the
class of the device through the receipt of Link Layer Discovery Proto-
col (LLDP) messages.
Power Budget Configure the interface port maximal power. If the remainder available
power less than this port power budget will not provide this port power.
Power Consumption The interface port output power drawn by device.
Cumulative Power
Consumption The cumulative measured usage power of PSE port in kilo-watts/hour.