Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 185 / 326

EKI-9500 Series User Manual 166
To access this page, click Switching > IPv6 DHCP Snooping > Base > Dynamic
Bindings .
Figure 4.175 Switching > IPv6 DHCP Snooping > Base > Dynamic Bindings
The following table describes the items in the previous figure.
Persistent
Use the IPv6 DHCP Snooping Persistent Configuration page to configure the persis-
tent location of the IPv6 DHCP snooping bindings database. The bindings database
can be stored locally on the device or on a remote system somewhere else in the net-
work. The device must be able to reach the IP address of the remote system to send
bindings to a remote database.
To access this page, click Switching > IPv6 DHCP Snooping > Base > Persistent .
Figure 4.176 Switching > IPv6 DHCP Snooping > Base > Persistent
The following table describes the items in the previous figure.
Item Description
Interface The interface on which the DHCPv6 client message was received.
MAC Address The MAC address associated with the DHCPv6 client that sent the
message. This is the key to the binding database.
VLAN ID The VLAN ID of the client interface.
IP Address The IPv6 address assigned to the client by the DHCPv6 server.
Lease Time The remaining IPv6 address lease time for the client.
Refresh Click Refresh to update the screen.
Clear Click Clear to remove the selected entries in the database.
Item Description
Store The location of the IPv6 DHCP snooping bindings database, which is
either locally on the device (Local) or on a remote system (Remote).
Remote IP Address The IP address of the system on which the IPv6 DHCP snooping bind-
ings database will be stored. This field is available only if Remote is
selected in the Store field.
Remote File Name The file name of the IPv6 DHCP snooping bindings database in which
the bindings are stored. This field is available only if Remote is
selected in the Store field.
Write Delay (Sec-
onds) The amount of time to wait between writing bindings information to per-
sistent storage. This allows the device to collect as many entries as
possible (new and removed) before writing them to the persistent file.
Submit Click Submit to save the values and update the screen.
Refresh Click Refresh to update the screen.
Cancel Click Cancel to restore default value.