Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 263 / 326

EKI-9500 Series User Manual 244
The following table describes the items in the previous figure.
4.4.25.2 Status
Use the X-Ring Pro Status page to view and configure the X-Ring settings.
To access this page, click Switching > X-Ring Pro > Status .
Figure 4.273 Switching > X-Ring Pro > Status
The following table describes the items in the previous figure.
Item Description
Ring ID Specifies a number ranging from 1 to 99 to identify a given X-Ring Pro
group.
Ring Mode Specifies the mode of the X-Ring Pro group. The value is either "Ring"
or "Coupling". The default value is "Ring".

The X-Ring Pro group denoted as mode "Ring" means it is a
switch connected to the other switches to form a ring topology.

The X-Ring Pro group denoted as "Coupling" means it is a switch
that is used to inter-connect two X-Ring Pro networks.
Interface 1 Specifies the first member interface for the X-Ring Pro group. The
value is either physical port or LAG (Link-Aggregation-Group) port.
Interface 2 Specifies the secondary member interface for the X-Ring Pro group.

For the X-Ring Pro group denoted as "Ring", the value is either
physical port or LAG (Link-Aggregation-Group) port.

For the X-Ring Pro group denoted as "Coupling", the value is
physical port or LAG (Link-Aggregation-Group) port or "None".
The value "None" implies the X-Ring Pro group is created not for
coupling dual-homing application.
Submit Click Submit to save the values.
Cancel Click Cancel to close the window.
Item Description
Ring ID Specifies a number ranging from 1 to 99 to identify a given X-Ring Pro
group.
Ring Mode Specifies the mode of the X-Ring Pro group. The value is either “Ring”
or “Coupling”. The default value is “Ring”.

The X-Ring Pro group denoted as mode “Ring” means it is a
switch connected to the other switches to form a ring topology.

The X-Ring Pro group denoted as “Coupling” means it is a switch
that is used to inter-connect two X-Ring Pro networks.
Operation State Specifies the run-time operation state of the X-Ring Pro group.

For the X-Ring Pro group denoted as “Ring”, the value is
“Standby”, “Edge”, “Master”, or “Transit”. For the ring topology,
there would be exactly one switch stays in master state and one
of two Ring interfaces is set in blocking state.

For the X-Ring Pro group denoted as “Coupling”, the value is
“Disconnect”, “Backup”, or “Primary”. There would be maximum
one coupling path stays in “Primary” to forward traffic between
two X-Ring Pro networks.