Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 55 / 326

EKI-9500 Series User Manual 36
To access this page, click System > Advanced Configuration > DHCP Server >
Pool Configuration .
Figure 4.15 System > Advanced Configuration > DHCP Server > Pool
Configuration
The following table describes the items in the previous figure.
Item Description
Pool Name Select the pool to configure. The menu includes all pools that have
been configured on the device.
Type of Binding The type of binding for the pool. The options are:

Manual: The DHCP server assigns a specific IP address to the
client based on the client's MAC address. This type is also
known as Static.

Dynamic: The DHCP server can assign the client any available
IP address within the pool. This type is also known as Auto-
matic.
Network Base
Address The network portion of the IP address. A DHCP client can be offered
any available IP address within the defined network as long as it has
not been configured as an excluded address (for dynamic pools only).
Network Mask The subnet mask associated with the Network Base Address that sep-
arates the network bits from the host bits (for dynamic pools only).
Client Name The system name of the client. The Client Name should not include
the domain name. This field is optional.
Hardware Address
Type The protocol type (Ethernet or IEEE 802) used by the client's hard-
ware platform. This value is used in response to requests from
BOOTP clients (for manual pools only).
Hardware Address The MAC address of the client (for manual pools only).
Client ID The value some DHCP clients send in the Client Identifier field of
DHCP messages. This value is typically identical to the Hardware
Address value. In some systems, such as Microsoft DHCP clients, the
client identifier is required instead of the hardware address. If the cli-
ent's DHCP request includes the client identifier, the Client ID field on
the DHCP server must contain the same value, and the Hardware
Address Type field must be set to the appropriate value. Otherwise,
the DHCP server will not respond to the client's request (for manual
pools only).
Host IP Address The IP address to offer the client (for manual pools only).
Host Mask For manual bindings, this field specifies the subnet mask to be stati-
cally assigned to a DHCP client. You can enter a value in Host Mask
or Prefix Length to specify the subnet mask, but do not enter a value
in both fields.