Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 222 / 326

203 EKI-9500 Series User Manual
To access this page, click Switching > MVR > Interface .
Figure 4.224 Switching > MVR > Interface
The following table describes the items in the previous figure.
4.4.13.4 Statistics
Use the MVR Statistics page to view statistical information about IGMP packets inter-
cepted by MVR.
Item Description
Interface The interface associated with the rest of the data in the row. When
configuring MVR settings, this field identifies the interface(s) that are
being configured.
MVR Interface Mode The administrative mode of MVR on the interface. MVR must be
enabled globally and on an interface in order to listen to the Join and
Report messages for the configured groups.
Type The type of interface, which can be one of the following:

Source: The port where multicast traffic is flowing to. It must be a
member of the multicast VLAN.

Receiver: The port where listening host is connected to the
switch. It must not be a member of the multicast VLAN.

None: The port is not an MVR port.
Status The active state of the interface, which can be one of the following:

Active: The port has link up and is in the forwarding state.

Inactive: The port may not have link up, not be in the forwarding
state, or both.
The interface VLAN information is also displayed as part of the status
and can be one of the following:

In VLAN: Interface is a member of one or more VLANs.

Not In VLAN: Interface is not a member of any VLAN.
Immediate Leave The MVR immediate leave mode on the interface. It can only be con-
figured on the receiver ports. MVR handles IGMP Leaves in Normal or
Immediate leave mode. When a Leave message is received, in the
normal mode a general IGMP query is sent from the switch to the
receiver port, whereas in the immediate leave mode the switch is
immediately reconfigured not to forward specific multicast stream to
the receiver port. The immediate leave mode is used for ports where
only one client may be connected.
Refresh Click Refresh to update the screen.
Edit Click Edit to edit the selected entries.