Advantech EKI-9512-C0IDW10E, Руководство пользователя

Страница: 104 / 326

85 EKI-9500 Series User Manual
The following table describes the items in the previous figure.
Policy List
Use the Policy List Configuration page to view, create, edit, and remove policy on the
device. A policy is a provisioning mechanism that allows event occurs on the device
that matches the policy criteria (event) to be received and transmitted only on certain
events.
To access this page, click System > Advanced Configuration > Event Manager >
Policy List .
Figure 4.78 System > Advanced Configuration > Event Manager > Policy List
The following table describes the items in the previous figure.
Item Description
Trap Log Capacity The maximum number of traps the log can store. If the number of
traps exceeds the capacity, new entries overwrite the oldest entries.
Number of Traps
Since Last Reset The number of traps the system has generated since the trap log
entries were last cleared, either by clicking
Clear Log or by resetting
the system.
Number of Traps
Since Log Last
Viewed The number of traps the system has generated since the traps were
last displayed. Displaying the traps by any available method (for
example, uploading the file from the switch or viewing the logs from a
terminal interface) will cause this counter to be reset to 0.
Log The sequence number of this trap.
System Up Time The time at which this trap occurred, expressed in days, hours, min-
utes and seconds since the device was last reset.
Trap Provides information about the trap.
Refresh Click Refresh to update the screen.
Clear Log Click Clear Log to clear the current entries from the log file and resets
the counters.
Item Description
List Name The name of the policy list. This field can be configured only when
adding a new policy list.
Event Options The method(s) used to decide which events will be applied to event
alarm action (Alarm LED, Alarm Relay, Alarm Relay 2, Logging, or
Trap).
List Type The type of list, which is one of the following:

Default: The list is preconfigured on the system. This type of list
cannot be deleted, and only the Event Options are configurable.

Configured: The list has been added by a user.
Refresh Click Refresh to update the screen.
Add Click Add to add a new policy list.
Edit Click Edit to edit the selected entries.