ADPRO iFT Скачать руководство пользователя | Manualshive

Страница: 53 / 80

background image

ADPRO

iFT Series Hardware Installation Manual

27817_08

53

14

Connecting PIR Detectors

14.1

Required PIR Firmware

For correct PIR alarm processing, a minimal PIR firmware version 2.00 is required. Previous firmware versions
also work with RS-485 communication, but do not support all features (e.g. alarm management).

14.2

Connecting PIR Detectors

To connect PIR detectors to the XO device, you have the following options:

Connection method

Max. no. of PIR detectors

RS-485 cable connected directly to the MIO card of the XO device

32 on the RS-485 bus

Via a USB-to-RS-485 8-channel distribution unit, connected to a USB port
on the XO device

32 on the RS-485 bus

Via a USB-to-serial-port RS-485 converter, connected to a USB port on the
XO device

32 on the RS-485 bus

Via the IFM-485-ST interface module, connected to a USB port on the XO
device

32 on the RS-485 bus

Via IP modules, connecting the PIR detectors via the local network to the
XO device (no RS-485 bus required)

34; with firmware version
XOa 3.02.0001 or above

You can connect maximum 32 PIR detectors on an RS-485 bus. However, you can combine an RS-485 bus and
IP modules to connect more PIR detectors to the XO device.
The maximum number of PIR detectors on an XO device is 34 (requires minimum firmware version
XOa 3.02.0001).
The XO client will indicate how each PIR detector is connected: over RS-485 (

SER

) or over IP (

ETH

).

You can connect a PIR detector to only one XO device.

Note

You need a PIR-HLI application license to enable the PIR detectors. Use Xchange to install the
license on the XO device. For more information, see the

Xchange Tool User Manual

(27816).

14.3

PIR Address Range

Regardless of the connection method, PIR detector addresses must be in the following ranges:

l

Firmware version XOa 3.02.0001 and above: 1–34. The XO device will not discover PIR detectors with
addresses above 34.

l

Firmware versions below XOa 3.02.0001: 1–32. The XO device will not discover PIR detectors with addresses
above 32.

Furthermore, each PIR detector must have a unique address, regardless of the connection method (RS-485
or IP). For instructions on setting PIR detector addresses, see the

ADPRO PRO E PIR System Setup Manual

(26571).

14.4

Direct Connection to the MIO Card

Connect the PIR detector(s) to the XO device by connecting the RS-485 cable of the PIR closest to the XO
device to the MIO card of the XO device. You can connect up to 32 PIR detectors in cascade on the RS-485 bus.

«
...
51
52
53
54
55
...
»

Содержание iFT

















































































Отзывы:

Нет отзывов

Похожие инструкции для iFT

Бренд: JBM electronics Страницы: 20

Бренд: Elvaco Страницы: 2

Бренд: Evolvere Страницы: 43

Бренд: Matrix Страницы: 322

Бренд: Aaeon Страницы: 26

Бренд: D-Link Страницы: 86

Бренд: SSS Siedle Страницы: 28

Бренд: NEC Страницы: 81

Бренд: Technicolor - Thomson Страницы: 52

Бренд: MikroTik Страницы: 9

Бренд: ECKELMANN Страницы: 34

Бренд: ZKTeco Страницы: 20

Ethernet Gateway V4

Бренд: Packet Power Страницы: 2

Firebox X Series

Бренд: Watchguard Страницы: 37

Бренд: Vertical Страницы: 42

Бренд: ViewSonic Страницы: 1

Бренд: Hybertone Страницы: 50

Бренд: Forum Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды