ADPRO iFT, Руководство по установке оборудования

Страница: 33 / 80

ADPRO iFT Series Hardware Installation Manual
27817_08 33
All IP cameras connected to eth1 need an IP address in the same range (same network segment). However, in
larger buildings it may happen that the IP cameras are on multiple network segments using multiple IP address
ranges. As of firmware version XO 4.0, you can use
static routes to extend the eth1 camera network to these
other network segments. For the configuration of the static routes, see the XO Client Software User Manual
(21796).
The PH10LU motherboard has two LAN connectors on board. Just connect the IP camera network to the eth1
port using an Ethernet cable.
You must set the Ethernet connection of your XO device (eth0) and the Ethernet connection of the camera
network (eth1) to different IP ranges.