ADPRO iFT, Руководство по установке оборудования

Страница: 6 / 80

iFT Series Hardware Installation Manual ADPRO
6 27817_08
9 Network I/O Units (Net I/O) 43
10 Monitor 44
11 Modem 45
12 4G Via Wingle 46
13 Audio 47
13.1 Audio IN 47
13.2 Audio OUT (Talkback) 47
13.2.1 Options 47
13.2.2 Setup for VM22A 48
13.2.3 Setup for VM22E 50
13.2.4 Troubleshooting Talkback 50
13.3 Using IP Audio Devices 52
14 Connecting PIR Detectors 53
14.1 Required PIR Firmware 53
14.2 Connecting PIR Detectors 53
14.3 PIR Address Range 53
14.4 Direct Connection to the MIO Card 53
14.5 Connection via the USB-to-RS-485 8-Channel Distribution Unit 55
14.6 Connection via the USB-to-Serial-Port RS-485 Converter 57
14.7 Connection via the IFM-485-ST Interface Module 57
14.8 Connection via IP Modules (PRO E-IPM) 58
14.8.1 Summary 58
14.8.2 Setting up the IP Modules 58
14.8.3 Connecting the IP Modules to the PIR Detectors 63
15 Power Consumption 64
16 Retrieving the IP Address 65
17 Diagnostics 66
17.1 Log Files and Reports 66
17.2 Retrieving Log Files 66
17.3 Retrieving Reports 68
18 Web Pages 70
19 Maintenance 71
20 Full Reset by Flashing the DOM 72
20.1 Flashing the Image File to the DOM 72
20.2 After a Full Reset 74
21 Product Labelling 75
21.1 Product Number Structure 75
21.2 Declaration of Conformity 76
Appendix A – Abbreviations 77