iFT Series Hardware Installation Manual
ADPRO
60
27817_08
7.
Click
Network
, and provide the correct network settings. The example screen above shows the settings for
an IP module with IP address 192.168.10.192. Honeywell recommends to use IP addresses in the same
range as the local network of the XO device (eth0; not in eth1 which is the range of the IP camera network).
8.
Click
OK
to save the settings.
Next, you will set up the serial port communication.
Содержание iFT
Страница 1: ...ADPRO iFT Series Hardware Installation Manual February 2019 Doc 27817_08 Firmware version XO 4 03 ...
Страница 2: ......
Страница 79: ......