7451A/7461A/7461P Digital Multimeter Operation Manual
6.7.4 SCPI Command Reference
6-40
2. Calculation function command
Function description
SCPI Command
Parameter
Query reply
NULL
Calculation setting
[:SENSe]:<Function>:REFerence:STATe
{ON,1|OFF,0}
{1|0}
NULL constant setting
The setting is enabled when
the NULL calculation is set to
ON.
[:SENSe]:<Function>:REFerence
[-9999999.E+6|0|
9999999.E+6]
(7461A/61P)
[-999999.E+6|0|
999999.E+6]
(7451A)
<real_6> (7461A/61P)
<real_5> (7451A)
Smoothing
Calculation setting
:CALCulate:SMOothing
{ON,1|OFF,0}
{1|0}
Smoothing count setting
:CALCulate:SMOothing:POINts
[2|10|100]
<int_3>
Scaling
Calculation setting
:CALCulate:SCALing
{ON,1|OFF,0}
{1|0}
Constant A setting*4
:CALCulate:SCALing:A
{ [-9999999.E+6|0|
9999999.E+6]|
MEASurement}
(7461A/61P)
{ [-999999.E+6|0|
999999.E+6]|
MEASurement}
(7451A)
<real_6> (7461A/61P)
<real_5> (7451A)
Constant B setting*4
:CALCulate:SCALing:B
Constant C setting*4
:CALCulate:SCALing:C
MAX/MIN
MAX/MIN calculation setting :CALCulate:AVERage
{ON,1|OFF,0}
{1|0}
MAX value reading
:CALCulate:AVERage:MAXimum?
Refer to Section 6.7.2,
“Output Data Format.”
MIN value reading
:CALCulate:AVERage:MINimum?
AVE value reading
:CALCulate:AVERage:AVERage?
Measurement count reading
:CALCulate:AVERage:COUNt?
<real_6> (7461A/61P)
<real_5> (7451A)
Comparator calculation
Calculation setting
:CALCulate:LIMit
{ON,1|OFF,0}
{1|0}
High constant setting*4
:CALCulate:LIMit:UPPer
{ [-9999999.E+6|0|
9999999.E+6]|
MEASurement}
(7461A/61P)
{ [-999999.E+6|0|
999999.E+6]|
MEASurement}
(7451A)
<real_6> (7461A/61P)
<real_5> (7451A)
LOW constant setting*4
:CALCulate:LIMit:LOWer
Whether to set the calculation
result LOW to PASS.
:CALCulate:LIMit:PASS:LOWer
{ON,1|OFF,0}
{1|0}
Whether to set the calculation
result GO to PASS.
:CALCulate:LIMit:PASS:MED
{ON,1|OFF,0}
{1|0}
*4:
How to set the parameter can be selected from entering the value directly and substituting the measurement value.
