7451A/7461A/7461P Digital Multimeter Operation Manual
6.7.4 SCPI Command Reference
6-38
LP-2W
"RESistance:LPOWer" "RES:LPOW"
LP-4W
"FRESistance:
LPOWer"
"FRES:LPOW"
Continuity
"CONTinuity"
"CONT"
Freq
"FREQuency"
"FREQ"
TEMP *7461P only
"TEMPerature"
"TEMP"
DCV-Bch HI-COM
"VOLTage:BDC:
BCOM"
"VOLT:BDC:BCOM"
DCV-Bch HI-LO
"VOLTage:BDC:B"
"VOLT:BDC:B"
DCV-Bch RATIO
"VOLTage:BDC:
RATio"
"VOLT:BDC:RAT"
Auto-range setting
The setting to Continuity, Diode,
and DCV-Bch is disabled.
[:SENSe]:<Function>:RANGe:AUTO
{ON,1|OFF,0}
{1|0}
Temperature unit setting
*7461P only
:UNIT:TEMPerature
{C|F|K}
{C|F|K}
Temperature measurement method
setting
*7461P only
[:SENSe]:TEMPerature:TRANsducer:TYPE
{RTD|TRTD|FRTD}
RTD:2W
TRTD:3W
FRTD:4W
{RTD|TRTD|FRTD}
Temperature sensor standard set-
ting
*7461P only
[:SENSe]:TEMPerature:TRANsducer:STANdard
{PT100|JPT100}
{PT100|JPT100}
Measurement range setting
DCV
[:SENSe]:<Function>:RANGe
0
Setting value
Maximum value in the
measurement range
(750 V in the fre-
quency measurement)
<real_6> (7461A/61P)
<real_5> (7451A)
ACV, ACV(AC+DC), Freq
2W
, 4W
DCI, ACI, ACI(AC+DC)
LP-2W
, LP-4W
The setting to Continuity,
Diode, and DCV-Bch is dis-
abled.
Sampling rate setting
[:SENSe]:<Function>:SRATe
{FREE|SFASt|FAST|
MED|SLOW|SSLow}
{FREE|SFAS|FAST|
MED|SLOW|SSL} *1
Display digit setting
[:SENSe]:<Function>:DIGits *3
[3|6|6] (7461A/61P)
[3|5|5] (7451A)
<int_1>
Integration time setting (PLC)
The setting is disabled in the fre-
quency measurement.
[:SENSe]:<Function>:NPLCycles
[0.02|10|100] *2
<real_6>
Integration time setting (second)
The setting is disabled in the fre-
quency measurement.
[:SENSe]:<Function>:APERture
[0.00001|10]
(7461A/61P)
[0.0001|10]
(7451A)
<real_6>
*1: ‘FREE’ is returned when the sampling interval or integration time is set.
*2: When the integration time is outside this range, it is set in seconds. (Refer to Section 5.7.1, “Sampling Interval (SI) and Integration Time
*3: The setting is applied to all functions.
Function description
SCPI command
Parameter
Query reply
