7451A/7461A/7461P Digital Multimeter Operation Manual
5.11 Storing and Recalling the Measurement Data
5-47
5.11 Storing and Recalling the Measurement Data
This instrument includes the measurement data memory, in which the following number of measurement
results can be stored.
•
7451A/61A: 10000 data
•
7461P: 20000
data
5.11.1
Memory Store
Select ON or OFF in ‘Store’ in
in
.
Pressing
determines the setting and turns on the ‘ST’ indicator.
The measurement data is stored into the measurement data memory by closing MENU
and starting the measurement.
When the number of measurement results reaches 10000 (20000 for 7461P), the
buzzer sounds and the ‘ST’ indicator blinks.
5.11.2
Memory Recall
Enter the data number to be recalled in ‘RCL’ in
in
.
Pressing
determines the setting and turns on the ‘RCL’ indicator.
The data number can be increased and decreased by using
and
before recalling
the data number.
5.11.3
Memory Clear
The measurement data memory is cleared when any of the following conditions occur.
• The power is turned on.
• The device clear command is executed from the GPIB interface.
• The *RST or ICL command is executed.
• The parameter initialization is performed in
in
.
• The memory store setting of the measurement data is switched from OFF to
ON.
7 MEM
MENU
ENTER
7 MEM
MENU
ENTER
6 INIT
MENU
