Acme Packet Net-Net 6300, Руководство по установке оборудования

Страница: 48 / 116

44 Net-Net 6300 Hardware Installation Guide Version 1.0
SYSTEM INSTALLATION
4. Line up the chassis slide with the Net-Net 6300 side panel. Position the slide’s
large marker hole at the front of the Net-Net 6300 chassis. The remaining three
tapped holes will line up with the slide’s holes. The following image points out
the tapped holes.
5. Use 3 x 6-32 x 5/16” screws to secure the chassis slide to the chassis. Notice that
the large hole in the slide is positioned toward the front of the Net-Net 6300.
6. Repeat steps 2-5 for the other side of the Net-Net 6300.
Installing the
Chassis in the
Rack
You now lift the Net-Net 6300 and install it into the rack. To prevent personal injury
or damage to the Net-Net 6300 follow these guidelines:
•
This installation requires two people and should not be attempted otherwise.
• Follow your organization’s best practices for lifting and installing heavy
components into an equipment rack.
• Ensure that the Net-Net 6300 remains supported until you have completely
installed it into the equipment rack.
To install the Net-Net 6300 in the equipment rack:
1. Lift the Net-Net 6300 into the correct position in the equipment rack.