Acme Packet Net-Net 6300, Руководство по установке оборудования

Страница: 71 / 116

MAINTENANCE INTRODUCTION
Version 1.0 Acme Packet, Inc. Technical Publications 69
1. Confirm that the relevant systems on Net-Net SBC1 and Net-Net SBC2 are
synchronized with the
show health command. Type show health and press
<Enter> on each system.
2. Confirm that Net-Net SBC1 and Net-Net SBC2’s current configurations match
by typing
display-current-cfg-version and press <Enter> at the ACLI prompt.
NETNETSBC1# display-current-cfg-version
Current configuration version is 5
NETNETSBC1# show health
Media Synchronized true
SIP Synchronized true
MGCP Synchronized true
H248 Synchronized disabled
Config Synchronized true
Collect Synchronized disabled
Radius CDR Synchronized disabled
Rotated CDRs Synchronized disabled
Active Peer Address 0.0.0.0
Redundancy Protocol Process (v3):
State Active
Health 100
Lowest Local Address 169.254.1.1:9090
1 peer(s) on 2 socket(s):
SML-STIC-2: v3, Standby, health=100, max silence=1050
last received from 169.254.1.2 on wancom1:0
Switchover log:
Jun 25 19:03:02.029: Active to BecomingStandby
Jun 25 19:04:54.684: Standby to BecomingActive
NETNETSBC1#
NETNETSBC2# show health
Media Synchronized true
SIP Synchronized true
MGCP Synchronized true
H248 Synchronized disabled
Config Synchronized true
Collect Synchronized disabled
Radius CDR Synchronized disabled
Rotated CDRs Synchronized disabled
Active Peer Address 169.254.2.1
Redundancy Protocol Process (v3):
State Standby
Health 100
Lowest Local Address 169.254.1.2:9090
1 peer(s) on 2 socket(s):
SML-STIC-63001: v3, Active, health=100, max silence=1050
last received from 169.254.2.1 on wancom2:0
Switchover log:
active system
synchronized
standby system
applications
synchronized
applications