Acme Packet Net-Net 6300, Руководство по установке оборудования

Страница: 66 / 116

62 Net-Net 6300 Hardware Installation Guide Version 1.0
STARTUP
Powering On the Net-Net 6300
This section explains how to power on your Net-Net 6300.
To power on the Net-Net 6300 hardware:
1. There are no ON/OFF switch’s on the power supplies. When you plug them in
the power is on and the system will start to boot.
2. When operating with redundant power supplies, both power supplies must be
plugged in either simultaneously or within a few seconds of each other. If the
second power supply is on long enough after the first, an alarm is generated.
3. The graphic display on the front control panel will begin to display information.
Initial Log on
Once you have established the console connection, powered on the Net-Net 6300
and a runtime image has been loaded, you are ready to login and begin configuring
the system. After the Net-Net 6300 System has initialized, the ACLI login prompt
appears in your terminal application as follows:
User Access Verification
Password:
If the Net-Net 6300 completed booting before you connected to the console port,
press the <Enter> key on the console keyboard a few times to activate the console
connection.
System access in the following procedure uses the default User and Superuser
passwords. If you do not have the default passwords, please send an email to
tac@acmepacket.com .
1. At the ACLI password prompt, enter the default system User password and
press <return>. Your entries are not echoed on the screen.
User Access Verification
Password:
ACMEPACKET>
From the User prompt you can view various configuration states and operating
statistics on the Net-Net 6300 System, but you perform configuration tasks.
2. Type enable and press <return> to enter Superuser mode. The prompt to enter
the superuser password appears.
ACMEPACKET> enable
Password:
3. Enter the Superuser password and press <return>. The system prompt will ends
with a pound sign instead of a closed-angle-bracket to let you know are in
Superuser mode.
Password:
ACMEPACKET#
4. You can now begin configuring your Net-Net 6300 System. Refer to the Net-Net
Configuration Guide to learn how to establish an IP address for your Net-Net
6300 System.
If you have any questions about booting or powering on your system, contact your
Acme Packet customer support representative directly or email:
tac@acmepacket.com .