Acme Packet Net-Net 6300, Руководство по установке оборудования

Страница: 47 / 116

SYSTEM INSTALLATION
Version 1.0 Acme Packet, Inc. Technical Publications 43
4. Place 2 x 10-32 screws through the stationary rail ear and screw in place.
5. Repeat Steps 3 and 4 for the other mounting point.
6. Repeat this procedure for the rear of the other stationary slide.
Installing the
Chassis Ears and
Slides
In this second portion of system installation, two chassis ears and two chassis slides
are secured to the Net-Net 6300.
To install the chassis rails on the Net-Net 6300:
1. Locate the following components:
•
6 x 10-32 x 5/16" flat head (black) screws
•
2 x front mounting ears (left and right)
•
6 x 6-32 x 5/16” screws
• 2 x chassis slides
2. Line up one chassis ear with the tapped holes as shown in the following image.
Position the chassis ear’s spring-loaded thumb screw toward the front panel of
the system.
3. Use 3 x 10-32 x 5/16" phillips head screws to secure the chassis ear to the chassis.
Final installation resembles the image below.