Acme Packet Net-Net 6300, Руководство по установке оборудования

Страница: 104 / 116

98 Net-Net 6300 Hardware Installation Guide Version 1.0
SAFETY
• If an electrical accident occurs, remove power from the system immediately by
unplugging the chassis.
• Always disconnect the power from the system when removing a Net-Net 6300
from its rack.
• When disconnecting power:
•
Disconnect the circuit breaker at the rack.
• Unplug or unscrew the power cords from the power supplies.
•
Use grounded AC power cords that are plugged into grounded electrical outlets.
• Never use extension cords to power a Net-Net 6300.
•
Ensure that the installation facilities have proper grounding systems and include
a grounded rack structure or local grounding bus bar.
•
When installing the Net-Net 6300 in an equipment rack, always make the
ground connection first and disconnect it last upon un installation.
•
Use shielded Category 5e or 6, RJ45 cables for all 10/100/1000 Ethernet
connections to protect the Net-Net 6300 from potential damage.
•
To avoid making a complete circuit (which causes electrical shock), use only one
hand when working with powered-on electrical equipment.
•
Use caution when using electrically conductive tools around the Net-Net 6300.
• Remove jewelry before working on the Net-Net 6300.
Battery Warning
Caution: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERY ACCORDING
TO THE INSTRUCTIONS.
Caution: Perchlorate Material—Special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate
.
ESD Safety
To protect the Net-Net 6300 delicate electronic components from damage from
static electricity, always follow the appropriate ESD procedures and wear the proper
protective devices (such as an ESD wrist strap) when handling any and all Net-Net
6300 hardware and while performing any Net-Net 6300 System hardware
procedures. There is an ESD receptacle in the top left corner in the rear of the Net-
Net 6300.
Precautions
To protect your equipment from ESD, follow these ESD safety precautions:
•
Ensure that the Net-Net 6300 is properly grounded.