Acme Packet Net-Net 6300, Руководство по установке оборудования

Страница: 15 / 116

COMPONENT OVERVIEW
Version 1.0 Acme Packet, Inc. Technical Publications 13
Reset
You reset the Net-Net 6300 by pressing the front panel’s reset button. This button is
recessed, and can only be pressed by inserting a thin wire, such as a paperclip,
through the reset button channel. Accidentally pressing the reset button can result
in the loss of software data or your configuration.
Pressing the reset button causes a hard reset, immediately rebooting the Net-Net
6300. After the reset button is released, the Net-Net 6300 begins its boot sequence
and loads the configured software file.
Alarm Active LED The alarm LED on the front control panel indicates if any alarms are active on the
Net-Net 6300. The LED can be three different colors to indicate the severity of the
alarms.
•
Unlit- system is fully functional without any faults
•
Amber- major alarm has been generated
•
Red- critical alarm has been generated.
Power LED
Green LED indicates the power is on.
Alarm Silence Button
The alarm silence button clears the alarm table internally and opens the alarm
circuits connected to the network interface unit’s alarm port.
Graphic Display
The graphic display is a four-line VFD display window on the Net-Net 6300 front
control panel that reports real-time status, alarms, and general system information.
Navigation Buttons
You use the navigation buttons to navigate through the menus and information
visible on the graphic display.