Acme Packet Net-Net 6300, Руководство по установке оборудования

Страница: 28 / 116

24 Net-Net 6300 Hardware Installation Guide Version 1.0
GRAPHIC DISPLAY
Base Display
The base display shows the type of Net-Net 6300 running. This information appears
when the system first starts up and when the graphic display times out at any menu
level.
NET - NET
SESSION DIRECTOR
The base display of a Net-Net 6300 in an HA node includes additional information
applicable to its HA state. See the "
Graphic Display Output for HA Nodes " section
in this chapter.
Alarm Display
The alarm display replaces the base display during an alarm condition. The alarm
display informs you of what symptoms are currently causing alarms. The number
and type of alarms appear on the Net-Net 6300 graphic display, which indicates
either a link alarm or a hardware alarm. For example, if there are two link alarms
present on the Net-Net 6300 the display appears like this:
2 LINK ALARMS
If the graphic display indicates an alarm condition, you can use the ACLI display-
alarms command to display the details of the alarm. When an alarm condition is
cleared, the base display replaces the alarm display. To clear an alarm, you must
execute the ACLI
clear-alarm command or resolve the cause of the alarm.
Graphic Display Menus
The Net-Net 6300 graphic display lets you access the five display menus for quick
access to the system’s current status.
Top Menu
The top menu provides top-level access to information in distinct categories of
system functionality.
To access the top menu from the base display or alarm display:
1. Press the Enter button. The first entry in the top menu appears.
2. Press the Up and Down buttons to scroll through the top menu categories. The
top menu rolls over when you reach the top or bottom of the menu.