Acer Altos R510, Руководство по обслуживанию

Страница: 76 / 143

69 Chapter 3
15. See letter “B” in the figure below and the arrow that leads from this letter to the component in the chassis.
This component is the air baffle that is referred to in the following steps. The letter “B” points to the cutout
that is referred to.
16. Power cables for drives installed to the right side of the air baffle must be routed beneath the front cutout
in the underside of the air baffle. The power cable for a drive installed to the left of the air baffle does not
need to be routed under the air baffle. See letter “B” in the figure below to identify the air baffle and the
cutout area. You may need to remove the air baffle to route cables underneath it. To see how to remove
and then install the air baffle, see “Removing and Installing the Air Baffle. “
17. Connect the SATA power cable adapter end(s) to the rear of the SATA drive. See letter “A” in the figure
below to locate the connector on the SATA drive.
18. (Optional) Install the front bezel. For instructions, see “Removing and Installing the Front Bezel.”
19. Install the chassis cover. For instructions, see “Installing the Chassis Cover.”
TP0130
B
A
A
D
C
E