44
Accessibility operation :
1
、
Command Resume : *RESET#0000##
。
Note: use this command can resume to the initial configuration
2
、
Command Restart*RESTART#0000##
Note: this command only restart TLT-2V5, and don't restart the configuration
3
、
Read the present configuration
Command
：
*GTAS#
Note : when the unit receive this command, the unit will send all of the configuration to the sender
Format
：
IMEI:Identity
MOD: point to point
（
SMS P2P 2
）
/SMS
（
SMS SC
）
/GPRS
GPS:
（
ON
）
/(OFF)/(AUTO)
HFR: hand free
MTPRF: monitor
（
SILENT
）
/
（
NORMAL
）
BS: basestation
GEO-FENCE=ON/OFF longitude,longitude data latitude, latitude data Radius
（
at least
ACE-TL210 GPS/GSM Vehicle Tracker User Manual V 2.0
33
0.1KM
）
GEO-FENCE STATE:RS/OS
DEFENCE
：
ON/OFF the switch of alarm when cut off the electricity
VOICE
：
ON/OFF the switch of calling
POWER
：
ON/OFF the switch of cut oil and power
RATE
：
XX overspeed
ST: the interval time when receive the position
TN: request number in the SMS Mode
GU:,GPRS user name, password
SRV: IP, Port
APN:,,GPRS port,APN user name
，
APN password
SAMP: sampling interval, the number of sampling (tracking when driving)
SAMP2
：
sampling interval, the number of sampling (tracking when vehicle stop)
HISTORY SAMP
4
、
Read all of the number and password
Format
：
*GTAN#
Note
：
when the unit receive this command, the unit will send all of the number and password to the
sender including center number and center password and user number and user password.
Data Format
：
U1: Number one, Password
U2:Number two, Password
U3:Number three, Password
SC:Center Number, Service Password
