28
Stop Tracking Mode" . The two mode is different according the configuration GPS interval time and
upload number of data, so can display the detail Real-Time Trail when the state is "Car Moving
Tracking Mode" and upload the data sparseness when the state is "Car Stop Tracking Mode"
so can
save the SIM Card Fee and also can keep the tracing effect. When the Upload Data Setting is change,
the unit will send the data from the memory automatically, and then follow the mode.
3.1) Car Moving Tracking Mode
Format
：
#805#user password# sampling interval T # the number of upload data each time N ##
eg
：
#805#0000#10#1##
Explanation: The time T unit of the sampling is second, 10 seconds at least
，
59999 seconds at
most
；
The number of upload data each time is N, at least is 1, at most is 50.
When ACE-TL210 receive the command, and confirm the password is correct, then ACE-
TL210 will send a feedback message to the sender what is SET GPS SAMPLING TIME AND
QUANTITY OK . also will implement this command, then the unit will get the GPRMC data and
save in the memory. and send the GPRMC Data to the server.if the data can't send it to the server by
other excuse like GSM Signal or Bad Internet, the data will save it automatically, and when the
internet is ok,
the unit will send the data again,and the state is AUTO. when users set the numberof
data is 0, the unti will close this function,and the unit will send message to the sender what is "GPRS
TIMER STOP"
3.2) Car Stop Tracking Mode
Format : #809#user password#X#Y
Explanation: The time X unit of the sampling is second, 10 seconds at least
，
59999 seconds at
most
；
The number of upload data each time is Y, at least is 1, at most is 50. Sampling interval T and
the number of upload data each time N product should meet greater-than-equal 60, that is T*N≥60.
When ACE-TL210 receive the command, and confirm the password is correct, then ACE-TL210
will send a feedback message to the sender what is "GPRS REPORT SAMPLING 2 OK " . also will
implement this command, then the unit will get the GPRMC data and save in the memory. and send
the GPRMC Data to the server.if the data can't send it to the server by other excuse like GSM Signal
or Bad Internet, the data will save it automatically, and when the internet is ok, the unit will send the
data again,and the state is AUTOLOW. when users set the numberof data is 0, the unti will close this
function,and the unit will send message to the sender what is "GPRS SAMPLING 2 STOP"
Attention :
1. this function is not effect by open or close the unit until the unit receive the new command .
2. The bland area only can save 300PCS Data, the new data will recovery the old data if above
300PCS Data.
