24
Moving is closed automatically whatever ACC State is open or close unless send 008 command
again. after you set 009 command, the utni will send "MOVE DEFENGCE:OFF" to the sender.
Attention : the Alarm for Moving of default is open, and the area is 500M
16. Updata on the Air
1). Formate : !-Password
Eg: !-0000
Note: when ACE-TL210 receive this command and confirm the password is correct, the unit will
restart and enter FTP Server to download procedure automatically.after succesful, the unit will
restart again, and it's ok.
2) Formate : !-Password,FTP Address, User Name, Password
Eg: !-0000, igarin.gicp.net,auto,123
Note: when ACE-TL210 receive this command and confirm the password is correct, the unit will
restart and enter FTP Server to download procedure automatically.after succesful, the unit will
restart again, and it's ok.
Attention : the area of FTP Address is
【
5
，
35
】
, and also can use domain, and made is for
characters,numbers,. _
（
_
）
（
-
）
. the user name is for FTP, the area is
【
3
，
20
】
, the password is FTP' S
password, the area is
【
3
，
20
】
.
17, change the time zone settings instructions
Command format: 896 + user password 4 + D + NN
Example: 8960000E08
Description: One user password for the four, D values of E, W, that the time zone thing, NN is a
two-digit (1-12), that when code. When the product after receipt of order, confirm the user
password is correct, after the success of products set to sender send a confirmation SMS TIME
ZONE SET OK, CURRENT: DN, such as: TIME ZONE SET OK, CURRENT: E8. Such as setting
8960000E08, set the time and after the success of all relevant data to the GPS receiver on the basis
of time plus 8, set 896000W07, set the time and after the success of all relevant data to the GPS
receiver based on the reduction of time 7. Default output Greenwich time, if you set the parameters
of NN for the 00 cases, product recovery output GMT
