37
further instructions or reset operation.
(4) After reset, the value of latitude and longitude marked with 0. Fence is turned off.
2.1> Open rectangular electronic fence
Open all rectangular electronic fence instruction format: 311 + user password
for example: 3110000
Open a single rectangular electronic fence instruction format: 311 + user pa GX
for example
:
3110000G5
Description: This command is used to open all the electronic fence and open a single rectangular
rectangular electronic fence, GX means that an electronic fence X, X range
【
1,16
】
. When the device
receives the instruction correctly recognized the user password to open the electronic fence sender
rectangular return confirmation messages: Open all rectangular electronic fence resume SET ALL
SQUARE GEO FENCE: ON; open a single rectangular electronic fence to SET SQUARE GEO
FENCE GX: ON.
2.2> closed rectangular electronic fence
Turn off all electronic fence rectangular Format: 310 + user password
for example
:
3100000
Electronic fence off a single rectangular Format: 310 + user pa GX
for example
:
3100000G5
Description: This command is used to open all the electronic fence and open a single rectangular
rectangular electronic fence, GX means that an electronic fence X, X range
【
1,16
】
. When the device
receives the instruction correctly recognized the user password to open the electronic fence sender
rectangular return confirmation messages: Open all rectangular electronic fence resume SET ALL
SQUARE GEO FENCE: OFF; open a single rectangular electronic fence is SET SQUARE GEO
FENCE GX: OFF.
Note: If you set multiple alarms occurred while rectangular enclosure, the priority call G1 fence,
fence G2, G3, G4 ... ... only to send the relevant location information, not make the call. Factory
configuration and reset, the default state for the RS.
13. Open the Electronic Fence: