![ACE PRODUCTS ACE-TL210 Скачать руководство пользователя страница 38](http://html1.mh-extra.com/html/ace-products/ace-tl210/ace-tl210_user-manual_3884267038.webp)
38
Command : 211 + user password
After set successfully, it will send the confirmation messages “GEO-FENCE ON” to the sender.
14. Close the Electronic Fence:
Command : 210 + user password
After set successfully, it will send the confirmation messages “GEO-FENCE OFF” to the sender.
15. Cut-Off Electricity And Oil Function
a. Cut-Off Command format: 900 + user password
b. Confirm Cut-Off command format: 901 + user password
Description: Due to the command with a certain degree of risk, so needs to do a more
confirmation operation. When the user need to cut-off electricity and oil, using a mobile phone to
send format a command, the device will return to: "Confirm Power OFF?" after it receives the order
and confirm the user password correct. If it receives the user sending format b command in ten
minutes and confirms password correct, white (purple) wire will output low level in order to control
the outside relay to cut off oil and electricity and back to confirm SMS: POWER OFF OK.
Recover electricity and oil function command
a. Recovery command: 902 + user password
b. Confirm the recovery command: 903 + user password
Description: When the device receives the cut-off electricity and oil function to recovery
command by the preset user numbers and confirms the password correct, will send the confirm
information "Confirm Power ON?" to the sender, and then prepares to receive the confirm
command. If within 10 minutes the device receives the users confirm command, white (purple) wire
will output high level in order to control the outside relay to recover oil and electricity. After
completion, send confirmation message "POWER ON OK" to the user.
Attention: this function is certain risk, it's will happen traffic in the freeway if you send this
command, so please consider again and again.
16.Overspeed Alarm Function
Format:#122#Password#X##
Eg: #122#0000#250##