23
Data is avaible or valid, and the state will display “AUTO START/AUTO STOP”be the ACC State.
when ACE-TL210 receive the 090 command, and confirm the password is correct.ACE-TL210 will
send a message to the sender what the content is "ACC STATE PROMPT:OFF". when ACC is
ON/OFF
，
the ACE-TL210 will not send any message whatever the unit is GPRS Or SMS Mode .
Attention : the default is ON, and once the configuration is ok whatever the unit is ON/OFF, the unit
will not change until receve the next command or reset command
15. ACC Checking and Alarm for Moving
Alarm Command for Moving :008+PRzzz.z
Close Alarm Command for Moving : 009+Password
Note: when ACE-TL210 receive 008 command, and confirm the password is correct,put Rzzz.z for
the radius of area. the zone of zzz.z
is
【
0.1
～
999.9
】
, the unit is KM. after configuration is ok,
ACE-TL210 will send "SET MOVE RADIUS OK"to the sender.
After configuration of the alarm for moving is complete, if ACE-TL210 checking the ACC State is
changed which from ACC ON to ACC OFF, after three minutes, the ACE-TL210 will take the
current position for the coordiration point, the unit will open the defence(use the zzz.z) whether the
GPS Data is Available or Valid .
when the ACC is OFF, if ACE-TL210 checking the car over the defence,in the SMS Mode, the
ACE-TL210 will send a message to the pre-saved numbers what the state is "STATE:ACC OS" (the
unit will send the current position to the server,the state is "ACC OS",and call the pre-saved numers,
the 150/151 comamnd will affect the unit that whether call the pre-saved numbers. if you reset the
unit, the unit will only send message and don't call numbers) ,once the car coming the defence, the
unit will send current position information to the server or send message and call the pre-saved
numbers, and the state is "ACC RS"
Once ACE-TL210 checking the ACC state is close(from Open to Close), the Alarm for Moving will
close automatically, when the ACC state is open(from Close to open), the Alarm for Moving will
open automatically
When ACE-TL210 receive 009 Command and confirm the password is correct, the Alarm for
