41
when the ACC is OFF, if ACE-TL210 checking the car over the defence,in the SMS Mode, the
ACE-TL210 will send a message to the pre-saved numbers what the state is "STATE:ACC OS" (the
unit will send the current position to the server,the state is "ACC OS",and call the pre-saved numers,
the 150/151 comamnd will affect the unit that whether call the pre-saved numbers. if you reset the
unit, the unit will only send message and don't call numbers) ,once the car coming the defence, the
unit will send current position information to the server or send message and call the pre-saved
numbers, and the state is "ACC RS"
Once ACE-TL210 checking the ACC state is close(from Open to Close), the Alarm for Moving will
close automatically, when the ACC state is open(from Close to open), the Alarm for Moving will
open automatically
When ACE-TL210 receive 009 Command and confirm the password is correct, the Alarm for
Moving is closed automatically whatever ACC State is open or close unless send 008 command
again. after you set 009 command, the utni will send "MOVE DEFENGCE:OFF" to the sender.
Attention : the Alarm for Moving of default is open, and the area is 500M
21. Invalid data is uploaded switch
Instruction Format: 08X + user password 4
Function: When the ACE-TL210 receiving the order, confirm the correct password, the setting is
invalid according to the value of X data is uploaded switch state. X = 1, open the invalid data
uploading. After the success of the sender set to send a confirmation short message: INVALID
DATA UPLOAD: ON, at this time whether ACE-TL210 received GPS data is valid will be
uploaded to the server. X = 0, close the invalid data uploading, set after the success of confirmation
to the sender to send a short message: INVALID DATA UPLOAD: OFF, then close the invalid data
upload, only upload valid data.
Note1: The factory set or reset state after the operation to stop uploading invalid data, set this
directive from the state of switch machine effect, until it received the relevant instructions to change
again, or reset operation.
Note2: 1, this feature is only effective in GPRS mode
2, the default value is OFF.
22, remote upgrade instructions
