29
3. Upload the data is limited by Move Sensor, if the Move Sensor is open, and the unit will stop send
data in this state, please see the detail specification of Move Sensor.
After you complete the three steps, then you can track your car in the platform.
Note: To ensure the product can normally respond to SMS commands, set the sampling interval of
time greater than or equal to upload 20 seconds.
Note: 1, time to upload the switch setting is not affected until you receive further instructions or reset
changes to the relevant operation.
2, the blind reported immediately back up to 300 data, more than 300, the new data will overwrite
the first backup data.
3. Replacement data, if a number of stored data will be uploaded by one per 50, not 50, the number
of how many upload until the replacement of complete data, the data began to upload now.
The Advanced Application and Configuration of GPRS Mode
1
.Change the telephone number in advance instructions
Format: *new numbers with 4-20 figures * user password (4 figures) *location number (1-3) **
eg: *13900000000*0000*1**
Explanation: You can store 3 telephone numbers at most in advance
。
When ACE-TL210
tracker receives the instruction and confirms the user password correctly, substitutes the new number
for the existing number. After success, it will send the confirmation messages (SET USER NUMBER
(1-3) OK) to the sender.
2. Change the user password of ACE-TL210
Format: 777+new password (4 figures) +old password (4 figures)
eg: 77712340000
Explanation: When ACE-TL210 tracker receives the SMS and confirm the user password correctly;
changes the new user password to the old password. After set successfully, it will send the
confirmation messages (SET USER PASSWORD OK) to the sender.
3 GPS State Configuration instruction
GPS will enable on the on / off / adaptive three work states by send text messages command. GPS
