![ACE PRODUCTS ACE-TL210 Скачать руководство пользователя страница 39](http://html1.mh-extra.com/html/ace-products/ace-tl210/ace-tl210_user-manual_3884267039.webp)
39
Note : X is mean reference value, and the unit is mail/hours(KM/H), the area is
(0,999), when the unit receive this command and confirm the password is correct,
Then implement this command. X=250 is mean that when the speed of the car is
Above 250KM/H, the unit will send a message to the threes users ,the format is like 4.1.6 and the
state is "OVER SPEED". At this time, if the speed of the car is lower as 250KM/H, then the unit will
send a message to the send which the state is "SAFE SPEED"
When you set the X==0, and at this time, the unit will close this function, when you set the X≠0, open
this function, and then send a message to the sender which is "SET RATE LIMIT:X"
17.Upload the history data
Record the history data:
If you want to use this function in SMS Mode, you need to change the mode in GPRS and set the IP,
APN, the detail way you can see the manual.
1) configuration
Format : #807#user password #X##
Note: X is frequency, the area is (0,999 ), the unit is "second". When the unit receive this command
and confirm the password is right. And set the history frequency is X. When the X=0, that's close the
function. If X=30, that's mean that the unit will save the data every 30se, if the command is ok, then
send "SET SAMPLEING OK" to the unit.
Attention :
1, the memory of every data is 100B, the unit can save about 3000PCS Data.
2, when the data is above 3000PCS Data, the new data will recovery the old data automatically.
3. If the Move Sensor is open already, and the car is always stop , the History Record will close
automatically until the unit is wake.
2) Upload the history data
A: upload the history data of 24h
Format : #808#user password #24##
When the unit receive this command and confirm the password is correct, then send "START
UPLOAD ALL HISTORY RECORD" and then send all of the data to the server. The format is like
1.1 state is "STORAGE"
Read all of the history data
Format : #808#user password##
When the unit receive this command and confirm the password is correct, then send "START
UPLOAD ALL HISTORY RECORD" and then send all of the data to the server. The format is like
1.1 state is "STORAGE"
18. Low Voltage Warning
When the ACE-TL210 ’s working voltage lower than the configuration, the unit will read the
GPS information, whether or not effective, immediately the unit will send the format as 4.1.6 location
information to the three stored numbers, the information state item automatically updates STATE: LP.