12
b. Confirm the recovery command: 903 + user password
Description: When the device receives the cut-off electricity and oil function to recovery command
by the preset user numbers and confirms the password correct, will send the confirm information
"Confirm Power ON?" to the sender, and then prepares to receive the confirm command. If within
10 minutes the device receives the users confirm command, white wire will output high level in
order to control the outside relay to recovery oil and electricity. After completion, send
confirmation message "POWER ON OK" to the user.
3) Recovery Command instant: 941+user Password
Note : 941=902+903 the unit will implement this command at once after receive this command.
Attention: this function is certain risk, it's will happen traffic in the freeway if you send this
command, so please consider again and again.
The Advanced Application and Configuration of SMS Mode
1. Set up the user password instruction
Format: 777+new password (4 figures) +old password (4 figures)
eg: 77712340000
Explanation: When ACE-TL210
tracker receives the SMS and confirm the user password correctly;
changes the new user password to the old password. After set successfully, it will send the
confirmation messages (SET USER PASSWORD OK) to the sender.
2. GPS state setting instruction
GPS will enable on the on / off / adaptive three work states by send text messages command. GPS
state is open after factory settings or reset.
A. open the GPS instruction
instruction format: 222 + user password 4
For example: 2,220,000
Description: When the ACE-TL210 receiving the order, confirm the user password is correct, open
the GPS power, after the success of the sender to send the confirmation to the "GPS ON OK . "
