17
Electronic fence takes the set coordinates as the center, the set radius parameters to determine the
scope of the fence. When open this feature, once the ACE-TL210 beyond the scope of the set fence, it
will send location information as to 4.1.6 to the 3 preset numbers. The information state item
automatically updates STATE: OS. At the same time, call the first user telephone number. If it is
unsuccessful (closed or unable to connect or no response), makes vibration and starts calling the
second and the third in turn.
When the ACE-TL210 re-enters the fenced area, it will immediately send location information format
4.1.6 to the three preset numbers. The information state item prompts STATE: RS. At the same time,
call the first user telephone number. If it is unsuccessful (closed or unable to connect or no response),
makes vibration and starts calling the second and the third in turn.
1) Set the scope of the fence
According to the input formats different of coordinates, user can choose the format as follows
instructions to operate.
Format1
：
003+ user password E/W
dddmm.mmmm
N/S
dd.mmmm
Rzzz.z
eg: 003xxxxE11406.0024N2233.4230R1
Explanation: E-- east longitude; W-- west longitude; N-- north latitude; S-- south latitude. In
this example, uses E and N, please according to the actual geographical position choose
corresponding coordinate form to set. In the demonstration, meanings of various parts are as follows:
E
dddmm.mmmm
is longitude information with units of degrees and minutes, and the ddd
expresses degree, mm.mmmm expresses minute (Accuracy for 4 after the decimal point, the
following zero cannot bypass)
N
dd.mmmm
is latitude information with units of degrees and minutes and the dd expresses
degree, mm.mmmm expresses minute (Accuracy for 4 after the decimal point, the following zero
cannot bypass)
Rzzz.z is radius for the domain (
999.9 - 0.1
), unit for KM.
When the tracker receives this instruction, judges to be authorized users and confirms the user
password correctly, it will send the confirmation messages “SET GEO-FENCE OK” to the sender.
