Chapter 5 Learning advanced techniques
83
Modifying chase rate and intensity level
While a chase is running, you can modify its speed using the Rate
slider. (You can also use [Beat]. For more information on [Beat], see
page
XX
.) You can modify the intensity of the chase output with the
Level slider.
Using the Level slider to set chase output levels
When you record a chase with
Acclaim 300, all channels are
automatically entered at full intensity regardless of the channel slider
setting. To modify the output level of chase channels you must use
the Level slider.
Set the Level slider at
10
to set the chase output at 100 percent. To
reduce the output level, pull the slider toward
0
, stopping at the
desired level. This sets all channels included in the chase at the same
level.
The numbers next to the slider indicate the chase channels' output
level. The scale is marked
0
through
10
, representing the percentage
of output divided by 10. For example, if the slider is set at
5
, the
output levels of the channels in the chase are set at 50 percent.
Using the Rate slider to control chase speed
The Rate slider controls the speed at which a chase proceeds by
varying the length of time each step remains on stage. To change the
speed of a chase, move the Rate slider up or down.
As you move the slider from
1s
to
.1s
, the rate of the chase decreases
from one second per step to a tenth of a second per step. For
example, if a slider is set at
.5s
, each step in the chase flashes for one
half second before the next one flashes.
www.carlosmendoza.com.mx
Содержание 300 series
