138
Chapter 8 Reference
Submasters [Subs]
Pressing [Subs] indicates you will press a submaster bump button to
record a sub.
After you have used channel and submaster sliders to create the look
you want, press [Subs] and then one of the submaster bump buttons.
This records the look as a submaster. The submaster is stored in the
slider immediately above the bump button.
Example
[Subs] submaster bump button [1] records the current look as
submaster 1.
Time sliders
The two Time sliders control the duration of crossfades. Each controls
the fade time of the cross fader immediately below it on the console.
They can be set separately to program different fade rates for each
scene.
To change the speed of a crossfade, move the Time sliders up or
down. As you pull the sliders down from
5m
to
0
, the duration of the
fade decreases from five minutes to zero. At the zero setting there is
no programmed fade time. You must manually control the crossfade
manually with the cross faders. You can set the rate of the fade at any
point between
0
and
5m
.
Once the fade time for a scene is set, initiate the crossfade by moving
the cross fader for that scene.
Example
Set scene A cross fader at
10
, scene B cross fader at
0
, all channel
sliders at
10
, scene A Time slider at
5m
, and scene B Time slider at
1m
. Pull both cross faders down, moving A to
0
and B to
10
. Scene A
output fades out in five minutes; scene B comes up in one minute.
www.carlosmendoza.com.mx
Содержание 300 series
