Chapter 4 Learning the basics
47
Follow these steps to create scenes and run manual crossfades:
1. Set Grandmaster at
10
(100 percent), turn off [B/O] LED, and set
Time sliders at
0
. Set scene A cross fader at
10
and scene B cross
fader at
0
.
2. Create scene A by setting scene A channel sliders at desired
levels.
3. With scene B cross fader at
0
, set scene B channel sliders at
desired levels for scene B.
4. Pull both cross faders down at once to bring scene B up and fade
scene A out. Move scene A cross fader to
0
and scene B cross
fader to
10
.
5. With scene A cross fader at
0
, set scene A channel sliders at
desired levels for next scene A.
6. Push both cross faders up at once to bring scene A up and fade
scene B out. Move scene B cross fader to
0
and scene A cross
fader to
10
.
7. Repeat steps 4 through 7 for each scene change.
Note: Scene A is at full intensity when the cross fader handle is at the
top of the slider; scene B is at full intensity when its cross fader handle
is at the bottom of the slider. This makes it easy to execute smooth
cross fades by moving both cross faders simultaneously with one
hand.
www.carlosmendoza.com.mx
Содержание 300 series
