50
Chapter 4 Learning the basics
Follow these steps to run timed crossfades:
1. Make sure the Grandmaster is set at
10
(100 percent) and the
[B/O] LED is not lit. Set scene A cross fader at
10
and scene B
cross fader at
0
.
2. Create scene A by setting scene A channel sliders at desired
levels.
3. With scene B cross fader at
0
, set scene B channel sliders at
desired levels for scene B.
4. Set scene A and B Time sliders to desired fade time settings.
5. Pull both cross faders down simultaneously to start the timed
crossfade. The crossfade starts as soon as you move the cross
faders and continues at the programmed rate. The progress of the
fade can be tracked by the LEDs to the left and right of the cross
faders.
6. You can stop the fade in progress by moving the cross faders back
to meet the lit LEDs.
7. To restart the fade, move both cross faders again in the original
direction. The fade resumes.
8. You can reverse the direction of the fade by moving the cross
faders back toward their starting point.
www.carlosmendoza.com.mx
Содержание 300 series
