ABEM Terrameter SAS 4000 / SAS 1000
- 135 -
19.2.13
Set SP
STS
t
t:
The measure time in seconds. Valid values 0.1-8.0 s (in steps of 0.1 s).
If no parameter list is defined the current parameter value are returned in a text string with the
same format.
19.2.14
SetStack
SAS
N
min
, N
max
, E
limit
, Norm
N
min
:
The minimum number of stackings.
N
max
:
The maximum number of stackings.
E
limit
:
The error limit that ends stacking (in percent). Valid values 0.5-100 (in steps of
0.5).
Norm:
Norm used to sum the stacked values. Can be 0 or 1, where 0=median and
1=mean.
This command sets the limits for the automatic stacking. N
min
must be less than, or equal to
N
max.
If N
min
is less than N
max
the stacking will be finished if the measurement error becomes
less than E
limit
.
If no parameter list is defined the current parameter values are returned in a text string with
the same format.
19.2.15
Sound
SND
freq, freq, freq.
This command sounds a tone with a pitch corresponding to
freq
(
freq
=100 lowest pitch,
freq
=20000 highest pitch). There is one tone for each parameter passed.
19.2.16
Contact Test
TST
This command performs a contact test by trying to transmit a current. If a valid measure mode
has been set, it returns the current transmitted. If a current could not be transmitted, a zero is
returned.
