ABB SCK, Системное руководство

Страница: 101 / 244

42/23-81 EN Rev. 4 System Manual SCK Gas Sampling System 101
Installing the cooling module
Risk of injury in the area of the gas sampling system due to moving or fall-
ing parts, hot surfaces, anti-freeze, compressed air, lubricating oil
Wear general personal protective equipment:

Closed overalls with long trousers and long sleeves
 Safety shoes
 Safety gloves suitable for mechanical work
 Safety glasses

Protective helmet
 If necessary, additional protective equipment if prescribed by the operator.
Danger of crushing when lifting or lowering the transport unit

Only appropriately trained personnel may transport the transport units and only
with the aid of the recommended transport equipment.

Do not stand under suspended loads.

Follow the transport instructions in these operating instructions carefully.
 4 galvanized steel screws (or stainless material) M12x30 or bolts M12x30
The following requirements must be met in order to install the cooling module:
 The site conforms to the designated site conditions (criteria see Choosing the
place of installation of the peripheral modules ).
 Fastening points are present to affix the cooling module.
 The cooling module is unpacked.
Mechanical, thermal
and material dangers
Heavy transport units
Screws required for
assembly
Requirements