manualshive.com logo in svg

ABB REACT-3.6-TL, Руководство по эксплуатации продукта

Поделиться
Скачать
ABB REACT-3.6-TL Скачать руководство пользователя страница 55

- 55 -

000560AG

4 - Lifting and transport

For the transport of lithium-ion batteries the installers can make use of 
legal exemptions, which are:
- “Ancillary rule” (1.1.3.1 c ADR, attachment 2 GGVSEB) 
- “1,000 units rule” for carriage in exempt quantities (1.1.3.6 ADR).

The “ancillary rule” can be applied only if the following conditions are met:

• Carriage is ancillary to the main business (deliveries to or returns from 

building or civil engineering works for repair or maintenance work).

• A volume of 450 litres is not exceeded per packaging.

• The quantity of 1000 units must not be exceeded (333 kg).

• Protections to avoid leaks must be arranged.

• The general standards on packaging must be complied with.

• The limitations for particular substances must be complied with.

• Sections 4.1.1.6, 4.1.1.7 and 4.1.6.8 ADR must be complied with.

The “1000 units rule” can be applied only if the following conditions are met:

• Respect of a maximum quantity of 1000 units (333 kg)

• Presence of a 2 kg extinguisher for each vehicle

• Marking and labelling of the packaging

• Waybill with correct indication of the dangerous substances 

• Respect of all the provisions of the ADR except for:

- ADR certificate

- Vehicle marking
- Written engagement

In addition, the following points must be verified and complied with:

• Load guaranteed in regulatory way

• Instruction of the driver

• Ban on driver opening packages

• Ban on smoking during loading operations

Скачано

 

с

 

сайта

 

интернет

 

магазина

 https://axiomplus.com.ua/

Содержание REACT-3.6-TL















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды