manualshive.com logo in svg

ABB REACT-3.6-TL, Руководство по эксплуатации продукта

Поделиться
Скачать
ABB REACT-3.6-TL Скачать руководство пользователя страница 45

- 45 -

000016BG

S

afety information and instructions 

The equipment has been manufactured in accordance with the strictest 
accident-prevention regulations and supplied with safety devices suitable 
for the protection of components and operators.

For obvious reasons, it is not possible to anticipate the great number of installations and 
environments in which the equipment will be installed. It is therefore necessary for the 
customer to appropriately inform the manufacturer about particular installation conditions.

ABB

 accepts no liability for failure to comply with the instructions for 

correct installation and cannot be held responsible for the upstream or 
downstream equipment.

It is essential to provide operators with correct information. They must therefore read and comply 
with the technical information provided in the manual and in the attached documentation.

The instructions provided in the manual do not replace the safety devices 
and technical data for installation and operation labels on the product, 
and they do not replace the safety regulations in force in the country of 
installation.
The manufacturer is willing to train staff, at its premises or on site, in 
accordance with conditions agreed to in the contract.

Do not use the equipment if you find any operating anomalies.

Avoid  temporary repairs. All repairs should be carried out using only 
genuine  spare parts, which must be installed in accordance with their 
intended use. 

Liabilities arising from commercial components are delegated to the 
respective manufacturers.

1

2

TRAINING

3

Safety and accident prevention

Скачано

 

с

 

сайта

 

интернет

 

магазина

 https://axiomplus.com.ua/

Содержание REACT-3.6-TL















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды