manualshive.com logo in svg

ABB REACT-3.6-TL, Руководство по эксплуатации продукта

Поделиться
Скачать
ABB REACT-3.6-TL Скачать руководство пользователя страница 46

- 46 -

000558AG

3 - Safety and accident prevention

H

azardous areas and operations 

E

nvironmental conditions and risks

The equipment is to be installed in locations with suitable environmental 
conditions which observe the safety conditions and do not prevent its 
regular operation. These conditions are listed in the technical data and in 
the installation chapter.

ABB is not responsible for any loss of the equipment, or part of it, which 
does not take place on the basis of the regulations and laws in force in 
the country of installation.

The same precautions should be adopted for dismantling the equipment.

The equipment is not designed to operate in environments that are particularly 

inflammable 

or explosive.

IThe customer and/or installer must appropriately train operators or 
anyone who may come into close proximity of the equipment, and 
highlight, with notices or other means where necessary, the hazardous 
areas or operations at risk : 

magnetic fields, hazardous voltages, high 

temperatures, possible discharges, generic hazard, etc.

Keep out of the reach of children

S

igns and labels

The  labels  affixed  on  the  equipment  must  strictly  NOT  be  removed,  damaged,  defaced, 

hidden, etc.

The labels must be regularly cleaned and kept in sight, i.e. NOT hidden 
by foreign objects and parts (rags, boxes, equipment, etc.)
The technical data provided in this manual does not in any case replace 

that shown on the labels affixed on the equipment.

Скачано

 

с

 

сайта

 

интернет

 

магазина

 https://axiomplus.com.ua/

Содержание REACT-3.6-TL















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды