ABB IRB 6640 Foundry Prime, Руководство по эксплуатации продукта, Страница: 405 / 496

4.7.2 Replacing gearbox axis 2
Introduction
This section describes how to replace gearbox axis 2. It describes the procedures
for both.
This section consist of the following parts:
• Preparations before removing gearbox axis 2 on page 407
• Removing the armsystem on page 410
• Removing gearbox axis 2 on page 410
• Preparation of the frame before refitting of gearbox axis 2 on page 412
• Preparation of the lower arm before refitting of gearbox axis 2 on page 413
• Preparation of the spare part before refitting of gearbox axis 2 on page 413
• Refitting gearbox axis 2 to the frame on page 415
• Refitting the armsystem to gearbox axis 2 on page 417
• Refitting the cable harness on page 418
• Concluding refitting procedure on page 418
Location of gearbox axis 2
The gearbox axis 2 is located in the lower rotational center.
xx0700000357
Attachment screws, M16x50 quality 12.9 Gleitmo (20 pcs) A
Attachment screws, M12x60 quality 12.9 Gleitmo (32 pcs) B
Gearbox axis 2 C
Motor axis 2 D
Continues on next page
Product manual - IRB 6640 Foundry Prime 405
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.7.2 Replacing gearbox axis 2